1. HOME
  2. Products
  3. LIQUID-MICRO-CYCLONE

Products

Overview

The basic diameter of the ceramics core of L.M.C. that is the inside diameter of the cone is from 6mm to 10mm, and an inlet and the overflow diameter is not tapered. 5 kinds of underflow diameter are available(1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm). Wide range application is available by changing ceramics core of different underflow diameters above, and by changing feed pressure by operating pinch valve that is installed in the inlet of pressure room. The optimal feed pressure depends on the application, is usually operated in the range of 0.5-5.0kg/cm2.

Feature

The ceramics core as the central work area of L.M.C. is a critical parts of this device. Since the intense whirlpool which occurs because of a turning flow, the smooth degree of the inner wall surface and enough wear resistance is critical factor of the capability of L.M.C. The ceramics core of the main body of L.M.C. is stronger than the usable hardest metal alloy now and is produced with the ceramics of the same type of special materials that is used for the bit nose cone of a space rocket and the missile.

Specification

The standard types of L.M.C. are 4 types as below.
Name
Model
Flow volume
Cores
liter/min
m3/h
L.M.C.
#5
15~16
0.9~1.0
5 pcs
#10
30~32
1.8~2.0
10 pcs
#25
75~80
4.5~5.0
25 pcs
#50
150~160
9.0~10.0
50 pcs

Dimensions, panel-cut,Application

LIQUID-MICRO-CYCLON

A viscous mineral (high-quality kaolin), calcium carbonate, talc, a deep red pattern, a color. Dye, a potato starch, cornstarch, ferrite (magnetic tape use), abrasives, the very small fine particles such as chemicals, classification of 2-10 μ are possible and have the separation performance that is near to a high-performance centrifuge and show a limit of the high efficiency side of the liquid cyclone. In addition, the installation space can be reduced by stacking L.M.C. multistage than continuation counterflow washing (the CCD method) carried out by a thickener (natural sedimentation concentration machine) needing a big fixed area conventionally. The combination with a filter and the centrifuge. In the case of using a filter and a centrifugal extractor for a purpose of the dehydration, L.M.C. concentrate the feed liquid and enhance dehydration.

Products

About Us

  • Temperature Control
  • Humidity Control
  • Air Purifier

nippo CO., LTD.

〒332-0015
2-13-20, Kawaguchi, Kawaguchi-City, Saitama-Pref, Japan
TEL:+81-48-253-2788